clear

Sign In

your password
check_boxKeep me signed in

Can't access your account?

placeUnit 6, 105 Kurrajong Ave, Mount Druitt, NSW 2770, Australia
scheduleMonday - Friday, 9:00am - 5:00pm
MAGNETIC PARTICLE, DYE PENETRANT & EQUIPMENT PRODUCTS
GET IN TOUCH ON (02) 4776 2320

BROWSEchevron_rightEQUIPMENTchevron_rightALL

We carry a wide range of equipment to supplement our Magnetic Particle Testing consumables Our most popular products are shown below. Please call for more information on products.
fullscreen fullscreen_exit done_all launch
AT069 UV LED Torch
zoom_in
AT069 UV LED Torch SMARTCHEM
check_box_outline_blankShow Comparison
Handy Magna MP-A2L
zoom_in
Handy Magna MP-A2L SMARTCHEM
check_box_outline_blankShow Comparison
A light weight 240V AC magnetic yoke for Magnetic particle Inspection, using both wet and dry methods. It is used to detect surface defects and cracks in ferromagnetic components and structures with it's AC magnetic field. Simple to use it comes as standard with flexible legs and a mounted induction powered LED light useful for inspections in areas of low light.
IMS Permanent Magnet
zoom_in
IMS Permanent Magnet SMARTCHEM
check_box_outline_blankShow Comparison
A light weight permanent magnetic yoke for Magnetic particle Inspection. It is used to detect surface and subsurface defects and cracks in ferromagnetic components and structures with it's DC magnetic field. Simple to use it is particularly useful in hazardous areas where powered equipment is not allowed, or where mains power is not available. Magnet height 45mm and overall length is 310 mm. All Crack Detectors are numbered and certified. Permanent Magnet tested to Standard AS 1171, ASME V or BS6072.
Industrial Marking Crayons
zoom_in
Industrial Marking Crayons LEVIATHAN
check_box_outline_blankShow Comparison
Australian made. Currently stocked in Red, Yellow and White. Other colours also available.
Matcon MAT 230 Yoke
zoom_inchevron_leftchevron_right
Matcon MAT 230 Yoke MATCON
check_box_outline_blankShow Comparison
The Matcon MAT 230 yoke is a light weight 240V AC magnetic yoke for Magnetic Particle Inspection, using both wet and dry methods. It is used to detect surface defects and cracks in ferromagnetic components and structures with its AC magnetic field. Simple to use it comes as standard with flexible legs and a top mounted switch.

The Matcon UV LED Leg Light can be supplied separately as an optional accessory.
Matcon UV LED Leg Light
zoom_inchevron_leftchevron_right
Matcon UV LED Leg Light MATCON
check_box_outline_blankShow Comparison
A UV light featuring two UV LEDs, it is designed to fit on the rear pole of AC Yokes. Powered by induction of the magnetic field produced by the AC Yoke, it does not require batteries. The LED's generate very little heat even after extended use. The lamp is robustly built making it suitable for in-house or field use. The design allows for single operator use in Fluorescent Magnetic Particle Inspections. The lamp is supplied in a protective case.
Parker B-300S
zoom_in
Parker B-300S PARKER
check_box_outline_blankShow Comparison
The Parker Probe B-300S is a light weight 240V AC magnetic yoke for Magnetic Particle Inspection, using both wet and dry methods. It is used to detect surface defects and cracks in ferromagnetic components and structures with its AC magnetic field. Simple to use it comes as standard with flexible legs. 

Parker Y-300 yoke light is also available, it is a molded inspection light designed to fit the Parker B-300 Contour Probe that produces substantial close-in illumination of visible light for magnetic testing. The light operates from the induction of the AC magnetic field produced by the yoke.
SL3100 5W UV Head Light
zoom_in
SL3100 5W UV Head Light SMARTCHEM
check_box_outline_blankShow Comparison
SL3100 is a light weight adjustable UV headlamp featuring a 5W Nichia UV LED. Powered by a Lithium ion battery pack it offers 3.5 hours of continuous operation. The LED is not affected by magnetic fields, and there is no warm up time for maximum intensity. UV intensity and irradiated area can be focused between spot and flood by adjusting the lamp head. The lamp head can be tilted downwards, up to 90deg. The lamp is supplied with a 240V charger and comes in a carry case.
SL8104 LED UV Light Range
zoom_in
SL8104 LED UV Light Range SMARTCHEM
check_box_outline_blankShow Comparison
The SL8104 range are light weight LED UV lights featuring 20W Nichia UV LED output (4 X 5W LED's). Available in 240V mains or battery operated they are suitable for continuous use. The bulb is not affected by magnetic fields, and there is no warm up time for maximum intensity. Robust and light weight, the lamp is supplied in a carry case and comes in a range of UV outputs from the ASTME-3022 compliant 4,000 microwatts up to 15,000 microwatts. The Nichia LED's have a 30,000 hour life.

Let's Talk

WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.